/

Purchase online

Select an online shop and you will be redirected

{{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}

{{shop.shopData.name}}
{{shop.shopData.zip}} {{shop.shopData.city}}

To the online shop

Local dealers

Find your brick-and-mortar dealer quickly and easily using our dealer search

Go to dealer search

360°

Module edge router MFK 700 EQ-Set 110V

Order number 574365

520,00 RRP exc. VAT

624,00 RRP inc. VAT

Go to dealer search

Recommended retail price of manufacturer. Prices of retailers may vary.↑

Items included and different models

{0} of {1} displayed

MFK 700 EQ-Set 240V

MFK 700 EQ-Set 110V

MFK 700 EQ/B-Plus 240V

This machine

Module edge router MFK 700 EQ-Set 110V
520,00 exc. VAT
624,00 inc. VAT

Items included

1.5° router table 1x

extraction hood 1x

Ø 1/4" clamping collet (6.35 mm) 1x

Ø 8 mm clamping collet 1x

open ended spanner, WAF 19 1x

parallel side fence with fine adjustment and extraction hood 1x

with ball bearing brake and chip deflector 1x

Qty. in pack

1.00 Pieces

Packaging

in SYSTAINER SYS 2 T-LOC
Comparable product

Module edge router MFK 700 EQ-Set 240V
520,00 exc. VAT
624,00 inc. VAT

Items included

1.5° router table 1x

extraction hood 1x

Ø 1/4" clamping collet (6.35 mm) 1x

Ø 8 mm clamping collet 1x

open ended spanner, WAF 19 1x

parallel side fence with fine adjustment and extraction hood 1x

with ball bearing brake and chip deflector 1x

Qty. in pack

1.00 Pieces

Packaging

in SYSTAINER SYS 2 T-LOC

Show details
Comparable product

Module edge router MFK 700 EQ/B-Plus 240V
351,00 exc. VAT
421,20 inc. VAT

Items included

1.5° router table 1x

extraction hood 1x

Ø 1/4" clamping collet (6.35 mm) 1x

Ø 8 mm clamping collet 1x

open ended spanner, WAF 19 1x

parallel side fence with fine adjustment and extraction hood 1x

with ball bearing brake and chip deflector 1x

Qty. in pack

1.00 Pieces

Packaging

in SYSTAINER SYS 2 T-LOC

Show details

Show details

close

Functions

Versatile when trimming edges.

Convenient conversion. The modular design makes the MFK 700 a cost-effective all-rounder: Only the router table, and not the entire router, needs to be changed – and it is ideally equipped for all tasks involved in corner and edge trimming. Simply set down the right table and you can immediately route veneers or grooves, round edges, create profiles and much more.

Wider application spectrum due to interchangeable router tables
Efficient dust extraction integrated directly on the router base
130 mm table support surface for accurate routing results
Electronic speed adjustment switch for perfect adaptation to the working material
Motor temperature monitor for a long service life

Product highlights

Achieve ideal results more quickly:

The universal interface enables various router table modules to be used for a range of different applications.
Convenient and safe:

The long router table support with auxiliary handle guarantees safe guidance – without tipping over.
Systems get it done:

Can be expanded in a number of ways with perfectly matched routers, router tables, collets, parallel side fence and more.

Product details

MFK 700 EQ-Set 110V

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.
Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Moving contact pad

The MFK 700 has an attachable base feeler bearing, ensuring results that are free from marks.
Surface protection

The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the cutter prevents the surface from being milled off.

Flush trimming

A 0° bench is also available, e.g. for flush trimming veneered or coated workpiece edges.
Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
Side stop with fine setting

The moveable stop jaws of the parallel side fence are installed optimally on the router and thus prevent it from tipping over. This makes perfect rebates and grooves very easy.
Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Flexible motor design

The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.

Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Moving contact pad

The MFK 700 has an attachable base feeler bearing, ensuring results that are free from marks.
Surface protection

The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the cutter prevents the surface from being milled off.
Flush trimming

A 0° bench is also available, e.g. for flush trimming veneered or coated workpiece edges.
Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
Side stop with fine setting

The moveable stop jaws of the parallel side fence are installed optimally on the router and thus prevent it from tipping over. This makes perfect rebates and grooves very easy.
Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Flexible motor design

The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Usage

Main applications

Routing solid wood, acrylic and PVC edge veneer
Chamfering, rounding and profiling edges
Grooving with side stop

Technical Data

Technical data

Power consumption

720 W

Idle engine speed

10 000 - 26 000 min⁻¹

Collet dia.

6 - 8 mm

Routing depth fine adjustment range

14.00 mm

Max. cutter diameter

32.00 mm

Dust extraction connection dia.

27 mm

Weight

1.90 kg

Drive type

Mains

Performance features

Antistatic function

Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.
CLEANTEC

Standard connection (27/36/50 mm) for dust extraction, protects the operator and the environment.
MMC Multi Material Control electronics

“Multi Material Control” power electronics with constant adjustable speed and temperature monitor for work on all types of material.
FastFix

Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Plug it

Removable, replaceable mains cable with safety lock for quick conversion.