Illustrations are exemplary. Please note the variant and scope of delivery.

PA-MB 40

Stop set
for MB 40
Contains
2 Article
Product details
Highlights
The perfect accessories for your craft
Holes at the edge of the workpiece.

With the appropriate accessory for your MB 40, you can drill holes on the workpiece edge at right angles and with repeat accuracy.

End face holes.

The stop for end face holes is your optimum accessory for right-angled holes on edges.

Parallel side fence.

Use the parallel side fence for drilling holes quickly and with repeat accuracy along the workpiece edge.

End face holes

By converting the MB 40 and using the stop for end face holes, holes can be drilled at right angles in end faces.

CENTROTEC quick-change system and FastFix attachments
Faster processes – without tools.

  • Mobile drilling attachment
    MB 40

    Compact drilling aid with depth adjustment via scale for right-angled, pinpoint and repeatable drilling.

    More info

  • Keyless chuck
    KC 13-1/2-MMFP

    For holding cylindrical shanks. Optimised clamping force protection against unintentional opening at high speeds.

    More info

  • Adapter
    AD-3/8" FF

    For the reception of 3/8" socket spanners.

    More info

  • Depth stop
    DD-DC

    Perfect for depth-limited screwdriving. Enables unscrewing without removing the attachment. Narrow attachment with good view of the screw position.

    More info

  • Tool chuck
    WH-CE CENTROTEC

    Drill chuck and bit holder in one: 50% smaller and 80% lighter than a standard drill chuck! Perfect for changing tools in a matter of seconds and fits all Festool cordless drills with FastFix interface.

    More info

  • Depth stop
    DC UNI FF

    Impression-free work thanks to the rubberised guard ring. Perfect for implementing screw fittings with repeat accuracy on façades or terraces.

    More info

  • Eccentric adapter
    EX-UNI

    Simply twist the green ring to adjust the angle in no time at all. Ideal for screwdriving close to edges.

    More info

  • Keyless chuck
    BF-FX 10

    Keyless chuck with a clamping range of 1 -10 mm. For CXS/TXS 12 and CXS/TXS 18.

    More info

  • Keyless chuck
    KC 13-1/2-FFP

    Keyless chuck with a clamping range of 1.5 - 13 mm.

    More info

  • Angle attachment
    AN-XS

    Angle attachment for CXS/TXS 12 and CXS/TXS 18. Enables demanding drilling and screwdriving applications in tight spaces.

    More info

  • Angle attachment
    AN-UNI

    Simply twist the green ring to adjust the angle in no time at all. The attachment no longer needs to be released from the tool.

    More info
Jump below the recommendations

This might also interest you

There is more to discover

MB 40-Set

NEW

MB 40-Set
Mobile drilling attachment
Jump above the recommendations