The DOMINO connector range contains all DOMINO D8 connectors, the associated drill template, the hinge location cutter and the cover caps. It is ideal for first-time users and guarantees the best overview in the long term.
All joints can be produced quickly and easily with the DOMINO DF 500 joining machine.
There is no easier way of producing a detachable corner joint. The drill template – which can be used with an extraction system – specifies the exact position of the drilled hole and the correct drilling depth, therefore guaranteeing error-free work.
With only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.
The centre panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the centre panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.
The DOMINO basic structure connector enables a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast and precise work.
