The Systainer³ M and SYS T-LOC have the same base area, but the heights are different.
Yes, the Systainer³ is compatible with old pull-out drawers. It is compatible with all other accessories, too.
Both the front carrying handle and the pull-out aid make it easy to remove the Systainer³ from a shelf system. The front carrying handle additionally allows for ergonomic carrying close to the body – however, this only applies to the smaller Systainers with a greater depth than height. It is best to carry the taller Systainers using the lid handle, which is why these are fitted with a pull-out aid.
|Old||New||Height with stand in mm|
|SYS 1 TL||SYS3 M 112||112||112||-|
|-||SYS3 M/L 137||-||137||New|
|SYS 2 TL||SYS3 M/L 187||164,5||187||+ 22,5|
|SYS 3 TL||SYS3 M/L 237||217||237||+ 20|
|SYS 4 TL||SYS3 M 337||322||337||+ 15|
|SYS 5 TL||SYS3 M 437||427||437||+ 10|
Yes – all Systainers are compatible, even across generations. Classic Systainers can also be combined with Systainer³ products as normal.
Yes, the Systainers are produced in Germany.
The current conversion plan is as follows:
Available from January 2020: TS 55, ETS EC 150, ETS EC 125
Disponible à partir d'avril : C 18, T 18, OSC 18, PDC 18, DRC 18, RO 150, RO 125, RTSR, DTSR, ETSR
Unfortunately, exchanges are not possible. We are a medium-sized company. From an organisational perspective, we are not in a position to convert our entire range of machines to the new Systainers in a single process. We also have no influence over what remaining stock is available on the market.
We are a medium-sized company. From an organisational perspective, we are not in a position to convert our entire range of machines to the new Systainers in a single process. We also have no influence over what remaining stock is available on the market.
You can use the product number to identify whether a product is in an old or new Systainer. All machines with the new Systainer³ will receive new product numbers.
Thank you for your interest in vehicle equipment combined with the new Systainer³.
Please contact our project partner bott at firstname.lastname@example.org