• Connecting the Bluetooth® battery pack to the Work App

    In order to be able to use the QUADRIVE with the Work App, a Bluetooth® battery pack is required that you must connect to the Work App once. Click on the "Add tool" menu in the Work App. Now hold down the green button on the Bluetooth® battery pack for approx. three seconds until the LED on the battery pack flashes blue. The Bluetooth® battery pack is now displayed in the Work App – select it to establish the connection.

    Note: An available software update for the Bluetooth® battery pack may be displayed in the Work App. Install the update, as a connection to the QUADRIVE is only possible with the latest battery pack software. Follow the instructions in the Work App for the installation of the software update.

    +
    Connecting the Bluetooth® battery pack to the Work App

  • Sliding the Bluetooth® battery pack onto the QUADRIVE

    Slide the Bluetooth® battery pack onto the QUADRIVE. Now follow the instructions in the Work App.

    +
    Sliding the Bluetooth® battery pack onto the QUADRIVE

  • Pressing the accelerator switch on the QUADRIVE

    Press the accelerator switch on the QUADRIVE. Then the tool is connected to the Work App. The QUADRIVE is now displayed in the Work App menu "All tools". There you also see the current connection status.

    Note: An available software update for the QUADRIVE may be displayed in the Work App. Install the software update to be able to use the IoT functions of the tool. Follow the instructions in the Work App to perform the software update. The Bluetooth® battery pack must remain plugged in during the installation on the tool. Now you can select the QUADRIVE in the Work App and apply your individual settings (e.g. right-hand/left-hand selector switch or light control) on the tool.

    +
    Pressing the accelerator switch on the QUADRIVE
Any further questions?

Whether you require advice, support or repair – we are always happy to hear from you.

Use the "SERVICE" menu in the Work App.

  1. The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.