/

    Purchase online

    Select an online shop and you will be redirected

    {{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}
    Local dealers

    Find your brick-and-mortar dealer quickly and easily using our dealer search

    Go to dealer search

    Cordless drill T 18+3 HPC 4,0 I-Plus

    NEW
    Order number 576447
    Go to dealer search
    1. Recommended retail price of manufacturer. Prices of retailers may vary.

    Items included and different models

    • This machine

      Cordless drill T 18+3 HPC 4,0 I-Plus
      Items included

      BP 18 Li 3.1 C battery pack 1x 

      2x  BP 18 Li 4.0 HPC-ASI battery pack

      rapid charger TCL 6 1x 

      belt clip 1x 

      bit PZ 2 1x 

      CENTROTEC BH 60 CE Imp magnetic bit holder 1x 

      CENTROTEC tool chuck 1x 

      FastFix angle attachment 1x 

      FastFix eccentric attachment 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

       
    • Comparable product

      Items included

      BP 18 Li 3.1 C battery pack 1x 

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      rapid charger TCL 6 1x 

      belt clip 1x 

      bit PZ 2 1x 

      CENTROTEC BH 60 CE Imp magnetic bit holder 1x 

      CENTROTEC tool chuck 1x 

      FastFix angle attachment 1x 

      FastFix eccentric attachment 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    • Comparable product

      Items included

      BP 18 Li 3.1 C battery pack 1x 

      2x  BP 18 Li 4.0 HPC-ASI battery pack

      rapid charger TCL 6 1x 

      belt clip 1x 

      bit PZ 2 1x 

      CENTROTEC BH 60 CE Imp magnetic bit holder 1x 

      CENTROTEC tool chuck 1x 

      FastFix angle attachment 1x 

      FastFix eccentric attachment 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    • Comparable product

      Items included

      2x  BP 18 Li 3.1 C battery pack

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      rapid charger TCL 6 1x 

      belt clip 1x 

      bit PZ 2 1x 

      CENTROTEC BH 60 CE Imp magnetic bit holder 1x 

      CENTROTEC tool chuck 1x 

      FastFix angle attachment 1x 

      FastFix eccentric attachment 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    Functions

    For quick changes between drilling and screwdriving.

    Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment, CENTROTEC quick-change system, as well as angle attachment, eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18+3 cordless drill is light, long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work. Available in T-design or – depending on personal preference – in the unique C-design as the C 18.

    • Switchover from screwdriving to drilling without changing the set torque
    • Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop
    • FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools
    • Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor
    • The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
    • Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells
    • Fully electronic torque setting and switch-off for precise screwdriving
    • The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop

    Product highlights

    • Easy to change as often as you like.

      The CENTROTEC quick change system, angle attachment, eccentric attachment and depth stop mean that you can step up the pace when drilling and screwdriving. The practical switch save function remembers the torque you have set, even when changing between drilling and screwdriving.

    • Power meets intelligence.

      To provide even longer-lasting performance per battery charge, the maintenance-free brushless EC-TEC motor only takes as much power as the individual screwdriving task demands. The Li-HighPower Compact battery guarantees full performance at all times – whilst weighing less than 600 g.

    • Guaranteed reliability.

      The cordless screwdriver and battery pack are of course completely covered with the comprehensive services of Festool SERVICE.

    Product details

    T 18+3 HPC 4,0 I-Plus
    • Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • Durable and extremely light

      The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.

    • Work comfortably

      The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.

    • Extra mobile with vehicle integration

      The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

    • Ideal for tight spaces

      As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the C 18.

    • Six bits always to hand

      The practical bit holder provides space for up to six bits – magnetically secured against falling out.

    • In the smallest of spaces

      The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

    • Living on the edge

      Every screw can be reached with the eccentric adapter.

    • CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • Chuck for standard tools

      The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

    • Optimum power performance

      Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.

    • Optimal lighting

      The integrated LED light permits precise work even in dark corners.

    • Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • Durable and extremely light

      The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.

    • Work comfortably

      The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.

    • Extra mobile with vehicle integration

      The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

    • Ideal for tight spaces

      As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the C 18.

    • Six bits always to hand

      The practical bit holder provides space for up to six bits – magnetically secured against falling out.

    • In the smallest of spaces

      The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

    • Living on the edge

      Every screw can be reached with the eccentric adapter.

    • CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • Chuck for standard tools

      The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

    • Optimum power performance

      Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.

    • Optimal lighting

      The integrated LED light permits precise work even in dark corners.

    Usage

    Main applications

    • Furniture assembly and kitchen fitting
    • Installation of fittings, rear walls, strips
    • Installation of doors and windows, and drilling and screwdriving in wood, metal and plastic
    • Fences, pergolas, carports, canopies
    • Production of wooden substructures

    Festool video

    Latest Festool TV episodes, quick guides and more.

    Festool TV-UK | Drill Drivers | C18 and T18

    01:36 minutes
    • 01:36
      Festool TV-UK | Drill Drivers | C18 and T18

    Technical Data

    
    Technical data
    Battery voltage
    18 V
    Gears
    2
    Idling speed, 1st gear/2nd gear
    0 - 450/0 - 1500 min⁻¹
    Drilling diameter, wood/steel
    45/13 mm
    Torque adjustment 1st/2nd gear
    0.8 - 8/0.5 - 6 Nm
    Max. torque, wood/steel
    35/50 Nm
    Chuck range
    1.5 - 13 mm
    Li-ion battery capacity
    4.00 Ah
    Weight with Li-ion
    1.70 kg
    Drive type
    Battery
    Performance features
    • Electronic

      Speed control for adjusting to all types of materials.

    • FastFix

      Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.

    • Torque shut-off

      Intelligent technology ensures the optimum screwdriving force for every material.

    • Lithium-ion battery

      Fitted with high-performance lithium ion battery pack.

    • EC-TEC motor

      The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.

    • AIRSTREAM

      Faster reuse of battery packs thanks to AIRSTREAM technology (cooling function for faster availability) and significantly increased charging capacity

    Noise and vibration values
    Drilling in metal: Uncertainty (noise) K
    5.00 dB
    Drilling in metal: Uncertainty (vibration) K
    1.50 m/s²
    Drilling in metal: A-weighted sound pressure level, LpA
    64.00 dB(A)
    Drilling in metal: A-weighted sound power level, LWA
    75.00 dB(A)
    Drilling in metal: Total vibration average, Ah
    2.70 m/s²
    Fastening: Total vibration average, Ah
    2.50 m/s²
    Fastening: Uncertainty (noise) K
    5.00 dB
    Fastening: Uncertainty (vibration) K
    1.50 m/s²
    Fastening: A-weighted sound pressure level, LpA
    64.00 dB(A)
    Fastening: A-weighted sound power level, LWA
    75.00 dB(A)

    Downloads

    Accessories